Problem:Neutron velocity selector: Difference between revisions
ucph>Tommy (Created page with "A neutron velocity selector is a drum that spins around an axis parallel to the beam. This axis lies below the guide. From the drum, a series of absorbing neutron blades stick...") |
m (Wikiadmin moved page Problem: Neutron velocity selector to Problem:Neutron velocity selector) |
(One intermediate revision by the same user not shown) | |
(No difference)
|
Latest revision as of 15:30, 20 September 2020
A neutron velocity selector is a drum that spins around an axis parallel to the beam. This axis lies below the guide. From the drum, a series of absorbing neutron blades sticks out radially. The ends of the drum are twisted with respect to each other. A principal sketch is shown in velocity selector figure on the Instrumentation page.
This effect of the selector is that only neutrons around a certain velocity (or wavelength) can pass through it.
Assume a selector length of \(L=0.25\) m, \(n=68\) blades, and a twisting angle, \(\phi = 48.3^\circ\), as for the selector at the SANS-2 instrument at PSI. Calculate the rotation speed you should use to select 10 Å neutrons.
Consider how long time it will take the neutron to travel through the velocity selector.
What should the angular velocity \(\omega\) be, when twisting \(48.3^\circ\) during the same period of time it takes the neutron to travel through the velocity selector?
The velocity, \(v\), of neutron with \(\lambda=10\)Å is
- \(v=\frac{h}{m_n \lambda}\),
and the time it takes the neutron to travel through the drum of the velocity selector, is
- \(\Delta t = \frac{L}{v}=6.34*10^{-4}\).
Thereby the angular velocity, \(\omega\), is
- \(\omega = \frac{\phi v}{L} =1333.9 \frac{\text{rad}}{\text{s}} = 12738 \, \text{rpm}\)